9. There are data monitoring: boot time monitoring, capacity monitoring, equipment fault information and automatic rejection system.
10. The distance between the upper and lower knives can be accurately adjusted. The distance between the upper and lower knives can be adjusted according to the V-CUT spacing of the PCB. The precision is controlled at ±0.1MM
11. The spacing between adjacent sets of blades can be adjusted between 8mm-230mm. The precision of the single board is controlled by the meson to control at 0.02mm, and the cumulative tolerance of the whole board is controlled at 0.1mm, which can quickly complete the required width.
12. The speed of the conveyor belt is adjustable;
13. The tool is specially made, the thickness of the tool is 8mm, and the single board can be divided into 8mm or more (bars below 8mm can be customized), the tool material is imported SKH-11 high speed steel, made in Taiwan, and the durability is increased 1.5. -2 times, can be repeatedly ground and reused;
Moveable Shelf Size
80, 120, 200, 400mm/second
Height of component
less than or equal to 12.5mm
Distance between component and V-slot
more than or equal to 3mm
Mobile phone: +86-16675158845 Website: http:en.qy-smt.com / www.morelequipments.com